Folding Wall Mounted Clothes Hanger Rack Clothes Hook Stainless Steel 304 with Swing Arm Holder Clothing Hanging System Closet Heavy Duty Drying Rack Nail Free Screw No Holes No Damage Wall 2 Pack
RUST PROOF: Made by T-304 premium-grade stainless steel, plus 18/10 Chromium/Nickel coating on the surface and fine polishing, which makes the surface shiny, and assures the quality, prevent corrosion & rust.
SPACE SAVER: It can swing 180 degrees to the left and right; You can swing it close to the wall to save space when you don`t use it,
SCIENTIFIC DESIGN:When you use itThe gravity of the hanging object on the swing arm will be transmitted to the bracket to stop it from swinging. If you accidentally Collisions it, The swing arm will swing and give way for you.Ideal for use in bedrooms, bathrooms,closets,Not afraid of dampness and oil,
HUMANIZED INSTALLATION DESIGN: Two ways to fix it,We are equipped with two pieces of strong adhesive screws, can avoid make holes on your wall or damage you wall. This type of installation is suitable for used by less than 15lb;And we have retained the classic installation mode,drilling holes and fixing with screws, suitable for hanging relatively heavy things.we konw, that made our cost has increased,but that can make convenient for you
QUALITY ASSURANCE: If accordance with the regulations and correct use, We provide two years quality assurance, Normal use of damage within two years, We will give you a new product for change
Packing List Swing arm holder:2set Screw assembly:2set Nail-free Strong adhesive screws:4pcs MaterialsSUS304 stainless steel+Strong adhesive Quality Assurance Period2YER SIZE:Please look at the picture of dimension INSTALL BY DRILLING 1.Mark the position of the holes for drilling on the wall according to the hole position on the plate. 2.Drill holes on the walldrill 2 6mm*30mm holes on the wall 3.Insert the expansion screws into the holes and make them inside the wall 4.Place the plate onto the wall, Make sure that the holes on the plate and the holes on the wall are at the same place. Insert the inner bushing into the screw and use a screwdriver to tighten them into the expansion screw holes and finally install the decorative cover. 5.Put the swing rack into the tube to finish the installation INSTALL BY NAIL-FREE STRONG ADHESIVE SCREWS 1.Wipe the surface to remove oil, Water and dust 2.Remove the nut and fix it on the hole of the object to be installed. Use the pencil to mark around the surface of the product,Remove the object to be installed, Tear off the protective sticker, Align the mark, And squeeze it with a rag. Press out the residual air between the adhesive and the wall 3.Paste the hook one by one 4.Put on the screws one by one 5.Test the hook by your hand.Check that the installation is secure 6.Put the swing rack into the tube to finish the installation MUST WAITING LEAST 12 HOURS ,SUGGEST 24 HOURS, BECAUSE THAT CAN MAKE THE BONDING STRENGTH UP TO THE HIGHEST
MaiHongda Amazon ASIN B07BNRVND3 Home & Kitchen Storage & Organization , Clothing & Closet Storage